Sand texture agent T-2071

简述：Compared with the competitive products, T-2071 can provide low cost, less dosage;good dispersion and gloss stability. Typical physical data: Physical State: white powder Specific Gravity or Density: 2.1 g/cm³ Particle size(D50): 20-30um Solid Content: >99%


Texture agent T-2071 (TDS)
1. Description
Texture additive was a modified polyethylene wax designed for powder coatingtoget“sand” matting textured effect with excellent anti-wearing performance.Comparedwith the same series products in Market, characteristic as below:lower usageascostdown; good dispersion and gloss stability.

2. Typical physical data
Physical State white powder
Specific Gravity or Density 2.1 g/cm³
Particle size(D50) 20-30um
Solid Content >99%

3. Suggested formulation
Epoxy resin  260 Epoxy resin  500
Polyester resin  260 B68 type matting agent  50
Texturing agent T-2071 2-3 Texturing agent T-2071 0.5-1
Organic Bentone 15 Flow agent T-988 10
Flow agent T-988 5 Matt BaSO4  200
Pigments and Fillers  450 Light calcium carbonate 250

4. Characteristics and application
● Providing excellent hardness, scratch/friction resistance and smoothness
● Silicon-free, good re-coating performance  Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosageofT-2071. To acquire more coarse texture, add higher dosage of T-2071.  Combing with organic bentonite will provide lower cost and good texture effect.  Coarse texture powder depends on particle size and texture agent dosage.
● Don't add in flow additive when produce semi-matt one, combine with silica to produce wouldbegoodchoice.  Prefer to select barium sulfate as the filler , meanwhile, using more flow additive to get smoothness,fine, little-coarse textured finishes.
● Adding 0.2-0.8% very fine talcum powder can enhance edge coverage.

5.Packaging and storage
Polyethylene lining, net weight 20KG caveat; stored in a cool and dry place to avoidmoistureabsorption.In the < 30 ℃ is valid for two years at room temperature.