• Home  >
  • Products  >
  • Texture Agent  >
  • Sand texture agent T-101
    • Sand texture agent T-101 Sand texture agent T-101
    Sand texture agent T-101 Sand texture agent T-101

    Sand texture agent T-101

    Introduction：
    T-101 can provide low cost, less dosage;good dispersion and gloss stability. T-101 is designed for low cost formulation at dosage of 0.3-0.8%.

    Typical physical data:

    Physical State: white powder

    Specific Gravity or Density: 2.1 G/cm³

    Solid content(%): 99

    Particle size(D50): 18-30um

    GET A QUOTE  Download pdf
     

    SAND PROFILE AGENTT-101(TDS)
    1. Description
    These sand texture agents are polyamide modified fluoride copolymer which can produceexcellentwear resistant matt powder coating. Compared with the competitive products, T-101 canprovidegoodcost, low dosage, good dispersion and gloss stability. T-101 is designed for good cost formulation，added amount 0.3-0.8%.

    2. Typical physical data

    Physical State white powder
    Specific Gravity or Density 2.1 g/cm³
    Solid Content(%) 99%
    Particle size(D50) 18-30um


    3. Suggested formulation

    Epoxy resin 260 Epoxy resin 500
    Polyester resin 260 B68 type matting agent 50
    Texturing agent T-101 4-5 Texturing agent T-101 2
    Organic clay 15 Flow agent T-988 10
    Flow agent T-988 5 Matt BaSO4 200
    Pigments and Fillers 450 Light calcium carbonate 250


    4. Characteristics and application
    ● Providing excellent hardness, scratch/friction resistance and smoothness
    ● Silicon-free, not affect to re-coating.  Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosageofT-101. To acquire more coarse texture, add higher dosage of T-101.
    ● In combined with organic clay will provide better cost and performance.
    ● Coarse texture powder will relate to particle size and texture agent dosage.
    ● Don't add flow agent in the flat grained power coating. Combining silica is better. Whenproducesemi-matt one, please combine with excessive texturing agent, flow agent and small quantityof mattagent (0.5%) in the formulation. Add barium sulfate as the filler.
    ● Adding 0.2-0.8% very fine talcum powder can remove the problem of edge coverage.

    5.Packaging and storage
    Polyethylene lining, net weight 25KG caveat; stored in a cool and dry placetoavoidmoisture absorption.In the < 30 ℃ is valid for two years at room temperature
     

    INQUIRY