• Home  >
  • Products  >
  • Texture Agent  >
  • Sand texture agent T-2071
    • Sand texture agent T-2071 Sand texture agent T-2071
    Sand texture agent T-2071 Sand texture agent T-2071

    Sand texture agent T-2071

    Introduction：
    Compared with the competitive products, T-2071 can provide low cost, less dosage;good dispersion and gloss stability.

    Typical physical data:

    Physical State: white powder

    Specific Gravity or Density: 2.1 g/cm³

    Particle size(D50): 20-30um

    Solid Content: >99%

    GET A QUOTE  Download pdf

    Texture agent T-2071 (TDS)
    1. Description
    Texture additive was a modified polyethylene wax designed for powder coatingtoget“sand” matting textured effect with excellent anti-wearing performance.Comparedwith the same series products in Market, characteristic as below:lower usageascostdown; good dispersion and gloss stability.

    2. Typical physical data
    Physical State white powder
    Specific Gravity or Density 2.1 g/cm³
    Particle size(D50) 20-30um
    Solid Content >99%

    3. Suggested formulation
    Epoxy resin  260 Epoxy resin  500
    Polyester resin  260 B68 type matting agent  50
    Texturing agent T-2071 2-3 Texturing agent T-2071 0.5-1
    Organic Bentone 15 Flow agent T-988 10
    Flow agent T-988 5 Matt BaSO4  200
    Pigments and Fillers  450 Light calcium carbonate 250

    4. Characteristics and application
    ● Providing excellent hardness, scratch/friction resistance and smoothness
    ● Silicon-free, good re-coating performance  Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosageofT-2071. To acquire more coarse texture, add higher dosage of T-2071.  Combing with organic bentonite will provide lower cost and good texture effect.  Coarse texture powder depends on particle size and texture agent dosage.
    ● Don't add in flow additive when produce semi-matt one, combine with silica to produce wouldbegoodchoice.  Prefer to select barium sulfate as the filler , meanwhile, using more flow additive to get smoothness,fine, little-coarse textured finishes.
    ● Adding 0.2-0.8% very fine talcum powder can enhance edge coverage.

    5.Packaging and storage
    Polyethylene lining, net weight 20KG caveat; stored in a cool and dry place to avoidmoistureabsorption.In the < 30 ℃ is valid for two years at room temperature.
     

    INQUIRY